Recommended articles from this article:
With the right care, your vinyl floor will retain its original appearance for a long time. The maintenance effort is not high and can be done in a few steps.
What you need is a care product and a mop or another tool.
There are also certain behaviours and measures that help to remove scratches and pressure marks on the vinyl floor. With a desk chair pad you can also protect your vinyl floor from scratches. What you can do to take proper care of your vinyl floor – you can find out here.
Vinyl floor care: Initial care after laying the vinyl floor
After the laying of the vinyl floor it is advisable to carry out a vinyl floor maintenance immediately.
This basic care ensures that the floor covering is sealed so that it is less susceptible to soiling, dirt deposits and scratches.
After you have cleaned the floor of all impurities, carefully cleaned it and it is dry, you can start with the initial care for the vinyl floor.
Apply a care product suitable for vinyl floors in two work steps, between which >g id=”gid_0″> at least two hours should be allowed.
To do this, spread the care product onto the floor in a wafer-thin layer using a mop or other tool and leave it to work for two hours.
This long exposure time is necessary so that the care product cannot form streaks.
When using vinyl floor care products, please also follow the manufacturer’s instructions on the label. Then repeat this step once again.
The maintenance film acts like a very thin varnish, which lies protectively over the floor covering. Some vinyl floors are already equipped with a special surface protection, so that initial maintenance after installation of the vinyl floor is unnecessary.
In principle, after each basic cleaning, you should also perform the so-called initial care on vinyl floors with surface protection.
In furnished rooms, you can make your work easier by working in several sections and temporarily removing or moving the furniture out of the way.
If large pieces of furniture are not pushed aside, you must expect that later gloss differences will be visible on the surface.
Vinyl floor care: basic cleaning to refresh the flooring
Basic cleaning is an important part of vinyl floor maintenance.
It is not only used to remove stubborn impurities. It is also recommended if your vinyl floor has lost its original shine.
For basic cleaning as a maintenance measure, mix all-purpose cleaner and water in the mixing ratio described on the label.
Apply this mixture to the floor with a mop, wiper or other tool and leave to work for about fifteen minutes.
Then remove residues of cleaning and maintenance products from the surface of the vinyl floor with a scrubbing brush with soft bristles and without a cloth.
Then carefully remove the dissolved dirt with a wipe or mop and wipe the floor covering again with clear water and let it dry.
You can shorten this procedure by using a single-disc machine for basic cleaning, which reliably removes residues of cleaning and care products.
For both variants, carry out the initial care described above, as you should apply a new care film after each basic cleaning to protect the vinyl floor. This is also the way to remove differences in gloss.
Vinyl floor care: How to protect your vinyl floor from damage
Vinyl floors are basically insensitive and easy to maintain. Nevertheless, it is pointed stones, dirt particles and pieces of furniture that can damage it.
But with certain measures you can avoid unpleasant scratches. For example, use protective glides or felt glides under tables, chairs and furniture, which allow smooth gliding without scratching or damaging the floor covering and which prevent pressure points in the floor.
Replace hard castors on office chairs with soft ones. Also, equip the entrance area with sisal, coconut or rubber floor mats so that dirt, stones and dust can be wiped off before entering the living area.
Letzte Aktualisierung am 2021-01-16 / Affiliate Links / Bilder von der Amazon Product Advertising API