If you have parquet or planks laid, it is not only the right choice of the parquet type or the optimal laying type that matters. Instead, you should always include surface treatment and finishing in your purchasing decision. Because the surface finish is decisive for an appearance with an aesthetically individual touch. In addition, it is the decisive factor in protecting the parquet floor from moisture and dirt in the long term.

Contrast the pros and cons in a targeted way

There are two options to choose from: you can oil or paint parquet. While varnish seals the floor, impregnate the parquet surface with an oil or wax. Whether oil or varnish is the better solution for your parquet cannot be answered in general terms. If the respective advantages and disadvantages are considered, however, the pendulum swings more in the direction of oil or wax on some important criteria. If you want to buy parquet,however, you should always weigh up the advantages and weaknesses of the finishing techniques.

Why seal parquet?

The sealing is the final surface treatment of the parquet. Possible methods are: sealing with varnish, wax or oil. In general usage, sealing is practically always a paint application. Treatment is important because wood as a natural raw material must be protected from moisture and dirt. The most effective way for this protection is to seal with varnish. This creates a particularly good protection, the process is ideal for heavily stressed rooms. If parquet is laid in the kitchen, a painting is also recommended. The warm radiance of the wood is slightly lost. Oil and wax, on the other hand, retain the original wooden character. However, a soil with such a seal is more sensitive. After a renovation, it is always necessary to seal the polished parquet planks fresh.

Always pay attention to the humidity

Wood oils have numerous advantages over lacquer. In particular, oxidative natural oils based on linseed oil receive the so-called diffusion openness, i.e. the breathability of the laid wood, in a parquet floor.

The fact is always:wood is basically hygroscopic and reacts to the respective climatic conditions. Thus, the parquet absorbs appropriate moisture in the room with damp air and thus expands. In the opposite case – i.e. in dry air, the parquet disappears. The intensity depends on the type of wood. Maple, beech and other light wood species, for example, have a generally high source and shrinkage behavior. A relative humidity of around 50 to 60 percent and a room temperature of about 20 degrees are considered an ideal indoor climate for the parquet and also for humans. Parquet professionals monitor the humidity with a hygrometer and use humidifiers for regulation.

It’s not just the optics that decides – the feel has to be right

But also the feel plays an important role in the decision whether you should oil or paint your parquet. After all, wood is a natural product that you can feel as a material at any time. So when you are faced with the decision whether to oil or paint your parquet, the feel is always a decisive factor. With oiled parquet, you have a clear advantage. Because the oil does not prevent the wood from feeling natural at any time.

The wood can no longer be felt by the lacquer layer

On the other hand, the wood is always under a lacquered layer of lacquered parquet. The wood is still visible, but you can’t feel it at all while running with bare soles of your feet.

Small scratches are not a problem for oiled variants

The oiled parquet variants also have a clear advantage over the painted solutions in terms of scratches and similar traces. Because smaller scratch marks are no longer noticeable if you regularly re-oil the soil. On the other hand, once scratches are in the paint layer, they always remain visible. Initially, scratches leave white cracks in the paint layer, before they later fill up with small dirt particles and shimmer greyish.

Regularly oiled parquet floors do not necessarily have to be sanded

This can destroy the entire aura of an optically attractive and comfortable parquet floor. If you also lay oiled parquet,maintain the wooden floor regularly and always treat it with oil in good time, you often do not have to grind your parquet floor again. This saves costs and effort.

It depends on the quality of the coating

If you purchase parquet that has been coated with a coating, you should always pay attention to the quality of the varnish. There are considerable differences here. For example, if a PU lacquer with multiple layers is used, you are usually on the safe side. There are parquet floors with a high-quality lacquer coating, in which no paint replacement can still be seen after 40 years. If, on the other hand, an inferior acrylic lacquer is used, a heaped grinding is almost pre-programmed. In many cases, an inferior product will sooner or later detach itself from the parquet rods or planks, as the wood always swells up due to changes in humidity and then pulls back together again.

Inferior coating layers are more quickly replaced

Experience shows that inferior lacquer always replaces itself at the edges of the parquet rods or the wooden floorboards. The remaining bright spots are visible, which show a visible contrast to the areas still sealed with varnish. And not only that: the bright spots get bigger and bigger over time. The special charm of a well-kept parquet floor remains by the wayside. Rather, the subsoil suddenly seems more like a patchwork carpet or simply not well maintained.

At a glance: parquet oils – advantages and disadvantages

  • The naturalness of the wooden floor is preserved.
  • Scratch marks and similar damage can be “repaired” by re-oiling.
  • Surface treatment with oil has a positive effect on the indoor climate.
  • Regular oiling prevents premature renovation. Sometimes soils of this kind do not need to be re-ground at all.
  • However, the maintenance of an oiled parquet floor takes a lot of time.
  • Lacquer gives the parquet a very special shine. There are the gloss levels semi-matt, matt and shiny.
  • The surface is optimally protected from mechanical damage and water by the coating layer.
  • Parquet machined with varnish is predestined for use in the commercial sector and under high demands.
  • In case of visible scratches or quirks, you usually need to completely grind a painted floor to repair the damage.
  • You can no longer feel the wood under the lacquer layer.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply